blocks_image
Storm Shelter
 
All of our storm shelters are steel reinforced with rebar poured with a 5,000 psi (28 day) compressive strength concrete mix.  Each storm shelter has an 8" turbine vent and a 6" inlet.  Our storm shelters feature a handrail design with steps and metal door with two locking mechanisms.  The top and bottom sections are tied together with 4 - 2' x 12" x 3/8" steel straps and 5/8" diameter grade 8 bolts.

Yes! A BargerAndSons.com storm shelter meets or exceeds the FEMA 320 standard.
 
Call (865.882.5860),
email, or come by our office and look over the storm shelter first hand before making a purchasing decision.
  
Price Delivered to site (installation not included)
$2300 + 9.5% Sales Tax


If you live in a county that does not border Roane County, Tennessee, figure $3.50 per mile from the 37763 zip code to your residence. This rule is valid up to 400 miles at which the delivery charge per mile increases to $6.00 per mile. Please call for a shipping quote to get a current up-to-date delivery quote as prices are subject to change daily with fuel prices.

Installation cost start at $800 and increase with distance.
Click below to download the storm shelter information and installation guide:
blocks_image
blocks_image
blocks_image
blocks_image
Partial Underground Storm Shelter CAD Drawing
47° Front Slope - 16,000 lb.
blocks_image
blocks_image
blocks_image
Above, a Barger And Sons inside picture of the storm shelter door that meets the FEMA 320 standard.
Above, an intrusion guard under one of the two vents in the top of the storm shelter. The intrusion guard is bolted to the inside ceiling with cast in place bolt anchors in the concrete. This provides the best protection against debris from entering the shelter through the vents.
blocks_image
Above, a Barger And Sons storm shelter installed and landscaped in a yard close to a door on the house.
blocks_image